Assembled dust shield to axle, offside. Cleaned and degreased back face of rear hubs and spray primed red oxide. Cleaned, degreased and applied Vactan to cast part of remaining brake shoes.
All posts by Nigel
5/9/2018
Wheel stud refitted to hub, hub rear cleaned and primed. Spacer and bellows seal cleaned and refitted to axle tube. One brake shoe cleaned and casting treated with Vactan. Brake dust shield back plate fitted to drivers side of axle.
3/9/2018
Removed the damaged road wheel stud from the offside rear hub – had to heat the lock nut to undo it but it came off easily after that. Used the arc welder to rebuild the sections damaged when the nut was cut off and then cut a new thread, all good now.
Before repair