Started to fabricate corner section of a window frame.
Tack welding front face to sill of window frame corner section
9/9/2019
Monthly Archives: September 2019
8/9/2019
Stripped the paint from both sides of the fairing ready for priming The steel support bracket from the bulkhead to the fairing was also stripped and painted and just needs a topcoat in DG red before fitting. Next I primed the inside face of the entrance/wing fairing. When that was dry, I undercoated it. Final job was to apply a second coat of topcoat on front bulkhead.
Bulkhead in final colour
[envira-gallery id=”1896″]
3/9/2019
Undercoat applied to the window in the rearward entrance bulkhead and a second coat to the two windows in the front bulkhead. I welded up the cracks in the shaped aluminium fairing panel that fits behind the nearside front wheel. I reinforced behind the cracks with some small pieces of beading to minimise the risk of it failing again.