Started to fabricate corner section of a window frame.
Tag Archives: windows
3/9/2019
Undercoat applied to the window in the rearward entrance bulkhead and a second coat to the two windows in the front bulkhead. I welded up the cracks in the shaped aluminium fairing panel that fits behind the nearside front wheel. I reinforced behind the cracks with some small pieces of beading to minimise the risk of it failing again.
1/9/2019
Yesterday I fitted the small window to the rearward entrance bulkhead. Once installed I was able to finish sanding the weld line in the bottom right-hand corner and apply and sand a coat of surfacing filler, although it really didn’t need much. Final job was to prime it.