Tag Archives: window frame

31/3/2024

Not much achieved this week as I have been tending to the MW.  I did manage to dismantle and dechrome two of the tree remaining droplights, in preparation for new glass.  Enjoyed a good day out in the MW on Sunday the 31st March.

24/3/24

Completed the first window pan acceptably after much difficulty and dissatisfaction, though it will need a lot of cosmetic work later.   This was then fitted to the bus, a job which took two of us so Anne assisted but only took a few minutes.   Started on the second, though not really satisified with the felt for vertical runner for window 1 but the felt is difficult to remove.  Started to assemble the next half-drop window, only to discover the half drop pain is so badly scratched it needs replacing, as do the other two which will inevitably delay the window fitting.    I removed the bottom horizontal part of the droplight frame by drilling out the rivets then removed the pane in once piece.   No more work this week as I had to attend to the thermostat on the MW.

17/3/2024

Colleected the glass from K.W. Glass in Braintree on Monday, then fitted the glass to the frame and started to install it in the bus.  It is a very poor fit around the top right hand corner but hopefully will ease back into place with a bit of careful effort.  I left the remainder of the screws for now.   Next, I continued applying chrome wrap to window components.  Finished one drop light so concentrated on preparing other components for assembling a halfdrop window This meant fitting the top bar to one of the glass panes that fit in the lower falf of the window frame.  Whilst the glazing silicone was setting I applied the felt to the vertical runners, which is another slow job but satisfying.   I completed three pairs then once the silicone was set I started to build up a complete window pan.  I almost completed this but ran out of time.