The rear o/s corner panel has been surface finished, primed and sprayed with undercoat. This took a lot of work to get right, hence the delay in recording progress. The o/s rear wheelarch mudwing has also been sprayed with undercoat. I may give them both another coat as the first is quite thin. In the meantime I have painted the bottom of the steering column brown ready for fitting the rubber draft seal, may need another coat.
Tag Archives: rear mudwing
3/09/2023
The offside wheel arch is complete. I riveted the liner and the mudwing in position in the wheelarch opening. Made a bit of a mess of trimming the parts but I think it can be rectified. Removed it from the opening to allow the panel above to be marked out and fitted before final fitting of the mudwing and wheelarch liner.
18/9/2018
Cleaned and Vactan’d nearside hub, primed with red oxide both drive hubs.
Removed offside rear mudguard by cutting off the heads of the screws.