Tag Archives: rear springs

31/12/2018 and 2018 year summary

Summary of work done in 2018:

Rear springs remanufactured and replaced

Rear brake back plates manufactured and fitted

Rear hubs removed and refitted correctly

Rear brakes fitted, adjusters removed and re-manufactured with new pins and springs

Rear axle and rear section of chassis cleaned and painted

Nearside windows removed and windows 4 and 5 frames repaired and primed

Rotted sections of entrance door pillar repaired and new reinforcement plate manufactured

Preservative and some paint applied to nearside body timbers.

 

 

2/9/2018

Bolted up the springs finally.  New washers fitted and nearside u-bolts trimmed to correct length.  I had to grind a bit of the rivet head away on the bottom leaf to allow the u-bolt saddle to seat against the bottom of the spring without a gap.  All the cotter bolts and nuts are fitted and tight  but the greasers still need to be screwed into the shackle pins.  This series of pictures shows the new springs:

20180905_111325

20180905_111359

20180905_111506

20180905_111449

20180905_111434

20180905_111414